EasyManua.ls Logo

Ganz ZN-M2AF User Manual

Ganz ZN-M2AF
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PixelPro Series ZN-M2AF Users Manual
10-2014-A
0
Question and Answer IconNeed help?

Do you have a question about the Ganz ZN-M2AF and is the answer not in the manual?

Ganz ZN-M2AF Specifications

General IconGeneral
Sensor TypeCMOS
Focal Length2.8-12mm
VarifocalYes
ApertureF1.4
Shutter Speed1/3 s to 1/100, 000 s
Digital Noise Reduction3D DNR
Bit Rate32 Kbps to 8 Mbps
Effective Pixels1920 x 1080
PowerPoE
Lens TypeVarifocal
Minimum Illumination0.01 Lux @(F1.2, AGC ON), 0 Lux with IR
Video CompressionH.264, MJPEG
Network InterfaceRJ45 10/100Mbps
Power Supply12 VDC ± 25%, PoE (802.3af)

Summary

Installation

Install Camera

Steps for assembling and mounting the network camera.

Accessing the Camera

Access from Browser

Instructions to access the camera's web interface using a browser.

The Live View Page

Overview of the live video stream display and its controls.

The Setup

Video

Codec

Settings for video compression standards like H.264 and MJPEG.

Live

Event

Network

Network > IP Setup

Configuration of the camera's IP address and DNS settings.

System

System > Maintenance

System reboot, factory reset, and firmware update procedures.

System Reset (Factory Default Reset)

Methods to reset camera settings to factory defaults.

Specifications

Related product manuals