Garage Smart MY LIFTER BASIC LIFTER - Installation Part 2: Power Adapter; Step 3: Securing Wires with Clips

INSTALLATION PART 2: POWER ADAPTER
Step 3: Secure Wires
1. Peel off sticker backing. (Figure 2.5)
2. Stick the clip where you want it.
(Figure 2.6)
3. Install the screw through the hole
(Figure 2.7) in the center of the clip.
4. Place all wires into the clip. (Figure 2.8)
5. Securely close the clip. (Figure 2.9)
Fig 2.6
Fig 2.5
Fig 2.7
Fig 2.8
Fig 2.9
18