Garage Smart Basic MyLifter User Manual

TOC
Installation and Operation Guide 3
About Garage Smart Basic Lifter 4
FCC Statement 5
Limited Lifetime Warranty 6
Installation Overview 8
What you need 8
Identify parts 8
Part 1: Install the Mounting Bracket 10
Part 2: Install the Power Adapter 14
Part 3: Install the Eyelet Screw 18
Part 4: Install the Hook and Pulley 20
Using the MyLifter App 24
Pair Your MyLifter With The App 24
Edit and Rename a Paired MyLifter 25
Raising and Lowering Items 26
Set the smart high and low points 27
Creating MyLifter Groups 28
To create a Locked Group: 28
To create a Flex Group: 31
- 1 -

Garage Smart Basic MyLifter Specifications

General

Connectivity	Bluetooth
Lifting Capacity	100 lbs
Control Type	App-controlled
Weight Capacity	100 lbs (45 kg)
Installation Type	Ceiling mounted

Summary

About Garage Smart Basic Lifter

Safety Information and Warnings

Crucial safety guidelines for operating the MyLifter to prevent injury or damage.

FCC Statement

Limited Lifetime Warranty

Installation Overview

What You Need for Installation

Lists the tools and materials required for the MyLifter installation process.

Identify Parts

Guide to identifying all components included in the MyLifter package.

Part 1: Install the Mounting Bracket

Mounting Bracket Installation Steps

Detailed steps for locating studs, drilling pilot holes, and securing the mounting bracket.

Part 2: Install the Power Adapter

Power Adapter Installation and Cable Management

Steps for mounting the power adapter and managing AC/DC cables using fasteners.

Part 3: Install the Eyelet Screw

Eyelet Screw Installation Procedure

Steps for finding the stud center, drilling, screwing, and attaching the carabiner.

Part 4: Install the Hook and Pulley

Hook and Pulley Setup and Cable Routing

Steps for pairing the app, lowering the cable, and routing it through the pulley hook.

Using the MyLifter App

Pair Your MyLifter With The App

Instructions for connecting your smart device to the MyLifter unit via Bluetooth.

Edit and Rename a Paired MyLifter

Steps to change the name of your paired MyLifter unit in the application.

Raising and Lowering Items

How to use the app's Device Control screen to manually lift and lower items.

Set Smart High and Low Points

Procedure for programming custom high and low positions for automated lifting.

Creating MyLifter Groups

To create a Locked Group

Steps for creating a Locked Group to synchronize multiple lifters for a single task.

To create a Flex Group

Instructions for creating a Flex Group to control multiple lifters individually or collectively.