Installation Overview
Installing the Basic Lifter is easy and involves the following basic steps:
1. Install the mounting bracket.
2. Install the power adapter.
3. Screw in the eyelet screw.
4. Attach the cable to the hook.
What you need
Installation requires the following tools:
l Ladder
l Stud finder
l Tape measure
l Pencil
l Drill
l 1/2" wrench or socket wrench
l Philips screwdriver
l Safety glasses
Identify parts
Inspect the box and make sure that you have all the parts shown in the image below:
To Next Page
Loading...
