GARDASOFT TR-HT2 Series - Ethernet; Rs232; Connectors (General)

TR-HT2xx LED Controller - User Manual
6.6 Ethernet
The RJ45 connector fitted to the TR-HT220-50 controller requires a
straight-through cable to connect to a network switch, hub or router. The
connection is 100Base-T and operates at 100MBits per second.
6.7 RS232
The RS232 connector fitted to the TR-HT260-50 controller is a standard
9-way female D-type. A standard straight through cable can be used to
connect the controller to a PC serial port. The communications port
settings are 115Kbaud, no parity, 8 data bits and 1 stop bit.
The pin allocation for the serial connector is shown overleaf:
6.8 Connectors (general)
The connectors required to mate with the TR-HT's connections are as
follows:
Connector Description Supplier/Part number
Power
input
Würth 351 series 2-
way screw terminal
free socket
Würth 691351500002
Farnell 164-1952
Trigger
input
Würth 361 series 4-
way screw terminal
free socket
Würth 691361100004
Farnell 1841351
Lighting
output
Würth 348 series 2-
way screw terminal
free plug
Würth 691348500002
triniti
sense
Würth 361 series 2-
way screw terminal
free socket
Würth 691361100002
Farnell 1841347
— 23 —