GARDASOFT TR-HT2 Series - 13 TR-HT Reference Information; Specifications and Ratings

TR-HT2xx LED Controller - User Manual
13 TR-HT reference information
This section contains information about the TR-HT's specification, ratings
and restrictions, and event and error codes.
13.1 Specifications and ratings
TR-HT220-50 TR-HT260-50
User interface
Ethernet and
push-button
RS232 and
push-button
Output channels Two constant current outputs with SafeSense
Output current Up to 5A continuous, or 50A pulsed
Output voltage 2Vto 72V
Output power
Up to 150W per channel (See the de-rating graph
overleaf), or 300W total.
Trigger input
3V-24V, TTL, and PNP. Input impedance
(nom) 8kΩ
Digital outputs Four 24V, 50mA open drain outputs
Pulse Width (PW) From 20μs to 5s
Delay from trigger to pulse
(td)
Maximum 3μs to 5s
Resolution
PW + td ≤ 500μs: 0.1μs
500μs < PW + td ≤ 100ms: 5.0μs
100ms < PW + td ≤ 10s: 100μs
Timing repeatability (delay)
±5μs (delay + pulse up to 60ms)
Otherwise ±50μs
Switch mode latency Maximum 5μs
Trigger rate 100kHz
Supply voltage
Regulated 12VDC to 48VDC
A SELVpower supply is required
Dimensions 256mm long x 139.6mm wide x 71.4mm high
Weight 1.25kg
Operating temperature 5°C to 50°C
Humidity 95% non-condensing
— 71 —