GARDASOFT TR-HT2 Series - Page 4

TR-HT2xx LED Controller - User Manual
8.3 Flags
34
8.3.1 Ethernet message flag (E) 35
8.3.2 FIFOflag (F) 35
8.3.3 Resync flag (R) 36
8.3.4 Pulse flag (P) 36
8.4 Virtual outputs
36
9 Trigger timing examples 37
9.1 Synchronised camera and lighting
37
9.2 Sequenced pulses
37
9.3 Gated pulses
38
9.4 Belt position triggering
39
9.5 Multiple exposures with different lighting
39
9.6 Simple FIFO mode
40
9.7 Resync mode
40
9.8 Resync and FIFO mode
42
10 Ethernet address 43
10.1 IPaddress
43
10.1.1 DHCP 44
10.1.2 Fixed IPaddress 44
11 Webpage configuration 45
11.1 Main Page
45
11.2 Configuration page
46
11.3 General setup page
47
11.4 Digital output configuration page
47
12 Configuration commands 49
12.1 Lighting setup
49
12.2 Front panel commands
49
12.2.1 Startup 49
12.2.2 Setting the light rating 50
12.2.3 Setting up continuous output 50
12.2.4 Setting up switched output 51
12.2.5 Setting up selected output 52
12.2.6 Setting up pulsed operation 53
12.2.7 Setting time periods 55
12.2.8 Setting the internal trigger timer 55
12.2.9 Using the key lock 56
12.2.10 Viewing the trigger status 57
12.2.11 Viewing the output current 57
12.3 Ethernet commands
58
12.3.1 Ethernet communication 58
12.3.2 Command structure 58
12.3.3 General commands 60
12.3.4 Trigger timing commands 65
12.4 General command summary
69
12.5 Trigger timing command summary
69
13 TR-HT reference information 71
13.1 Specifications and ratings
71
13.2 Restrictions
72
13.2.1 Continuous mode 72
13.2.2 Switched mode 72