Gardena 1825 - Setting Watering Program Details

9
GB
Setting the time of day:
2. Set the time on the inner black scale by turning the control
knob and confirm the time you have selected by pressing the
OK button (e.g.: 10:00 am).
The Start Time LED flashes.
Setting the watering starting time:
3. Set the watering starting time on the inner black scale
by turning the control knob and confirm the time you have
selected by pressing the OK button (e.g.: 20:00).
The Frequency LED flashes.
Setting the Watering Cycle:
4. Set the watering cycle on the outer grey scale (Frequency
Hours / Days) using the control knob and confirm your
selection by pressing the OK button (e.g.: 12 hour cycle).
The Run Time LED flashes.
2.
3.
4.