Problem Possible Cause Remedy
Pump doesn’t start or suddenly
stops during operation
Dirt particles are jammed in the
suction base.
v Disconnect plug and clean suction
base (see 5. MAINTENANCE).
Pump runs, but output suddenly
decreases
Suction base is clogged. v Disconnect plug and clean suction
base (see 5. MAINTENANCE).
NOTE: For any other malfunctions please contact the GARDENA service department.
Repairs must only be done by GARDENA service departments or specialist dealers approved
by GARDENA.
7. TECHNICAL DATA
Submersible pumps
aquasensor
Dirty water pumps
aquasensor
Unit Value 9000
(Art. 1783)
Value 13000
(Art. 1785)
Value 8500
(Art. 1797)
Value 13000
(Art. 1799)
Rated Power W 320 650 380 680
Rated power l/h 9,000 13,000 8,300 13,000
Max. delivery capacity bar 0.7 0.8 0.6 0.9
Max. pressure m 7 8 6 9
Max. delivery height m 7 7 7 7
Max. submersion depth mm 1 1 35 35
Contaminated water with
particle size of max.
mm 5 5 30 30
Power cable m 10 H05RN-F 10 H07RN-F 10 H05RN-F 10 H07RN-F
Pump connection universal (G 1 ¹⁄₄" M) / universal nipple
Min. water level for operation mm 5 5 45 45
Weight approx. (without cable) kg 3.8 5.4 4.0 5.6
Max. media temperature °C 35 35 35 35
Mains voltage / Mains frequency V / Hz 230 / 50 230 / 50 230 / 50 230 / 50
Min./max. cut-in height mm 5 / 175 5 / 210 65 / 230 70 / 265
Min./max. cut-out height mm 3 / 170 3 / 205 40 / 225 40 / 260
Sound power level L
WA
1)
dB (A) 48 55 55 55
Measuring process complying with:
1)
EN 60335-1
Cut-in / Cut-out height:
The cut-in and cut-out height varies.
Only for the submersible pumps Art. 1783 / 1785:
The residual water height (flat suction down to approx.
1 mm) is only reached during manual operation with the
swivel feet
8
turned to 1 mm (see 3. OPERATION).
To Next Page
Loading...
