Gardena EasyControl User Manual

The watering programme is easily entered using the
controls.
A watering program comprises the watering dura-
tion, cycle and start time.
Controls [ Fig. F1 ]:
Buttons Function
1
OK-button /
Man.-button
Applies the values set with the
-
-
-buttons.
For switching the water throughput on or
off manually.
2
-button
Changes the watering duration.
3
-button
Adjusts the watering cycle.
4
-button
Delays the watering start time.
Display [ Fig. F2 ]:
Display Description
5
Flash consecutively whilst watering is
carried out.
6
Flashes when the battery needs to be
replaced.
The valve is still opened for 4 weeks. Is
continuously displayed when the battery
is empty. The valve is not opened any
more.
Display Description
6
Replace battery (see 3. PUTTING YOUR
WATER COMPUTER INTO OPERATION
Computer into Operation “Insert
battery”).
7
Sensor
/
Sensor
Indicates that the sensor registers dry
and the programmed watering is carried
out.
Indicates that the sensor registers wet
and the programmed watering is not
carried out
(see 3. PUTTING YOUR WATER
COMPUTER INTO OPERATION
„Connect soil moisture or rain
sensor“).
8
Watering duration (
flashes when in
input mode).
9
Watering cycle (
flashes when in input
mode).
0
Start time delay ( flashes when in input
mode).
Displays the remaining time until the pro-
gram start.
EN
20

Gardena EasyControl Specifications

General

Brand	Gardena
Model	EasyControl
Category	Desktop
Language	English