Gardenline GLCS 85 E - Page 20

20
AFTER SALES SUPPORT
1300 922 271
service.australia@
isc-gmbh.info
GLCS 85 E
09/201491568
6.7 Set the depth limiter spacing (Fig. 12/13)
Once the chain has been fully sharpened, you must
make sure that the depth limiter spacing is kept (the
depth limiters (B) must be lower than the cutting links
(A). You may need to file the depth limiters (B) to the
specifications for your chain using a file (C) (not inclu-
ded in delivery).
11 12
13
9
C
A
B
GLCS_85_E_AUS_SPK7.indb 20 05.06.14 13:56