21
AFTER SALES SUPPORT
1300 922 271
service.australia@
isc-gmbh.info
GLCS 85 E
09/2014
91568
7Data
Cleaning, maintenance and ordering of spare parts
Always pull out the mains power plug before starting
any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
• We recommend that you clean the tool immediate-
ly after you use it.
• Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the tool’s
plastic parts. Ensure that no water can get into the
interior of the tool.
GLCS_85_E_AUS_SPK7.indb 21 05.06.14 13:56
To Next Page
Loading...