Gardner Denver RNC300 User Manual

52 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

REFRIGERATED

TYPE

COMPRESSED

AIR DRYERS

INSTRUCTION MANUAL

RNC Series

Models: RNC100, RNC125, RNC150, RNC200,

RNC250, RNC300, RNC400, RNC500,

RNC600, RNC750

5002737 Rev. J 02/17

18-2-670 RNC100-750 New Platform 1st Edition

For Sales and Service: (800) 883-2477

Or visit Sales and Service at www.gardnerdenverproducts.com

Table of Contents

Questions and Answers:

K
Kimberly MooreAug 18, 2025
Why is the pressure drop so high across my Gardner Denver RNC300 Dehumidifier?
- W
  wandagreenAug 18, 2025
  A high-pressure drop across your Gardner Denver Dehumidifier can stem from a few reasons. First, check the flow rate to ensure it's not excessive. Freezing of moisture in the evaporator due to a refrigeration system fault can also cause this issue. Lastly, a clogged separator or optional Oil Removal filter element could be the culprit; if so, replace the filter element(s).
S
Shawn ScottAug 22, 2025
How to troubleshoot a Gardner Denver RNC300 Dehumidifier refrigeration system that is not functioning properly?
- V
  Victoria MontgomeryAug 22, 2025
  If the refrigeration system of your Gardner Denver Dehumidifier isn't working right, begin by checking the power to the unit. Ensure the ON/OFF switch is in the “ON” position and that the line disconnect switch is closed. Inspect fuses and breakers for continuity. Have an electrician examine the wiring for any faults or loose terminals. Also, check if ambient conditions are within the specified minimum and maximum temperature ranges. For air-cooled models, ensure the condenser fins are clean and that there is free airflow across the condenser. If the problem continues, further assistance is required.
W
Wayne WashingtonAug 28, 2025
What causes a high pressure drop across my Gardner Denver RNC300 Dehumidifier?
- R
  robertvaughnAug 28, 2025
  A high pressure drop across your Gardner Denver Dehumidifier could stem from a few reasons. First, check the flow rate to ensure there isn't excessive air flow. Another potential cause is the freezing of moisture in the evaporator due to a refrigeration system fault. Lastly, the separator or optional oil removal filter element might be clogged, necessitating replacement of the filter element(s).
J
Jennifer ReedAug 30, 2025
What to do if the refrigeration system is not functioning properly in my Gardner Denver Dehumidifier?
- M
  martineznicoleAug 31, 2025
  If the refrigeration system of your Gardner Denver Dehumidifier isn't working correctly, begin by checking the power supply to the unit. If the power light is off, ensure the unit is receiving power. If the compressor light is off, turn the switch to the “ON” position. If the refrigeration compressor cycles on and off, close the disconnect switch. Check for continuity and have an electrician inspect the electrical connections. Also, verify the minimum and maximum temperature ranges, and clean the condenser, ensuring free airflow. If the problem continues, further assistance is required.
C
Cynthia TrujilloSep 3, 2025
Why is the dew point indicator in the red area on my Gardner Denver RNC300 Dehumidifier?
- D
  David RossSep 3, 2025
  If the dew point indicator on your Gardner Denver Dehumidifier is in the red area, it could be due to the dryer being overloaded, resulting in a high air outlet temperature. It may also be because the refrigeration system is not functioning properly, also leading to a high air outlet temperature. If the dryer is running with no load, the light will go out when air flow is established.
M
Mr. Gregory CunninghamSep 12, 2025
Why is there a high pressure drop across my Gardner Denver Dehumidifier?
- K
  Kim PattersonSep 12, 2025
  A high pressure drop across your Gardner Denver Dehumidifier can be due to several reasons. First, check the flow rate to ensure there isn't excessive airflow. If moisture is freezing in the evaporator due to a refrigeration system fault, see section D (not provided). Lastly, the separator or optional Oil Removal filter element might be clogged; replace the filter element(s) in this case.

Gardner Denver RNC300 Specifications

General

Brand	Gardner Denver
Model	RNC300
Category	Dehumidifier
Language	English

Summary

General Safety Information

Safety Precautions

Covers hazards related to pressurized devices, electrical operation, and breathing air.

Installation

Location and Mounting Requirements

Details on selecting an appropriate location and mounting the dryer unit securely.

Piping and Electrical Connections

Instructions for connecting air inlet/outlet, water lines, and electrical power.

Operation

Operating Conditions and Start-up

Information on minimum/maximum operating parameters and the initial start-up sequence.

Timer Drain and Controller Features

Operation of timer drains, programming modes, and I-Controller Level 4 functions.

Electronic Demand Drain Operation

Maintenance

Condenser Coil and Separator/Filter Care

Troubleshooting Guide

I-Controller Level 1 & 2 Issues

Common symptoms and corrective actions for I-Controller Level 1 and Level 2.

I-Controller Level 4 Issues

Common symptoms and corrective actions for I-Controller Level 4.

Reference Information

Sizing Calculations

Engineering Data Tables

Set Point and Alarm Tables

Wiring Diagrams

I-Controller Level 1

I-Controller Level 2 Models

I-Controller Level 4 and Transformer Pack

Warranty Information

Warranty Terms and Period

Details on the product warranty, coverage, limitations, and period.

Related product manuals

Preview: Gardner Denver RNC25

Gardner Denver RNC25

Preview: Gardner Denver RNC125

Gardner Denver RNC125

Gardner Denver RNC150

Gardner Denver RNC200

Gardner Denver RNC250

Gardner Denver RNC600

Gardner Denver RNC500

Preview: Gardner Denver RNC Series

Gardner Denver RNC Series

Preview: Gardner Denver RSD Series

Gardner Denver RSD Series

Gardner Denver RCD Series

Gardner Denver GDD18F

Gardner Denver DGH Series