Replacing the Battery
1 Twist the cover counter-clockwise to unlock it.
TIP: You can use a golf glove to help loosen the cover.
2 Remove the cover and the battery .
3 Insert the new battery into the cover with the negative side facing the inside of the cover.
NOTE: Do not damage or lose the O-ring gasket.
4 Replace the cover, and rotate clockwise until it clicks to lock it.
NOTE: Two notches in the cover and base should be aligned.
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can degrade the life of the product.
Do not use a sharp object to clean the device.
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
Specifications
Battery type User-replaceable CR2032, 3 V
Battery life Up to 4 yr.
Operating temperature range From -10° to 50°C (from 14° to 122°F)
Wireless frequency/protocol 2.4 GHz @ -0.45 dBm nominal
Water resistance IEC 60529 IPX7
1
Troubleshooting
Is my device compatible with my sensors?
The Approach CT10 sensors are compatible with some Garmin golf devices.
Go to garmin.com/ct10compatibility for compatibility information.
1
The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating.
4 Troubleshooting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
