Garmin COMPACT REACTOR 40 - Tools and Supplies Needed; Power and Data Layout

Tools and Supplies Needed
• Safety glasses
• Drill and drill bits
• Wrenches
• Jigsaw or a rotary cutting tool (for installing an optional helm control)
• Wire cutters/strippers
• Phillips and flat screwdrivers
• Cable ties
• Solder and water-tight heat shrink tubing or water-tight, heat-shrink, butt-splice connectors
• Dielectric grease
• Marine sealant
• Marine corrosion inhibitor spray
• Portable or handheld compass (to test for magnetic interference)
• Hydraulic hose with machine-crimped or field-replaceable fittings that have a minimum rating of 1000psi
• Hydraulic T-fittings
• Hydraulic fluid
• Thread sealant
• Hydraulic bleeding equipment
NOTE: Mounting screws are provided for the main components of the autopilot system. If the provided screws
are not appropriate for the mounting surface, you must provide the correct types of screws.
Power and Data Layout
WARNING
When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or
product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product
specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product
warranty.
2