Garmin EDGE 530 User Manual

Installing the Speed Sensor
NOTE: If you do not have this sensor, you can skip this task.
TIP: Garmin recommends you secure your bike on a stand while installing the sensor.
1 Place and hold the speed sensor on top of the wheel hub.
2 Pull the strap around the wheel hub, and attach it to the hook on the sensor.
The sensor may be tilted when installed on an asymmetrical hub. This does not affect operation.
3 Rotate the wheel to check for clearance.
The sensor should not contact other parts of your bike.
NOTE: The LED flashes green for five seconds to indicate activity after two revolutions.
38 Wireless Sensors

Garmin EDGE 530 Specifications

General

Type	Wireless bicycle computer
Product color	Black
Time functions	Clock, Day time, Ride time
Speed functions	Average speed, Current speed
Ambient light sensor	Yes
International Protection (IP) code	IPX7
Internal memory	- GB
Routes quantity	100
Display diagonal	2.6 \
Display resolution	246 x 322 pixels
Battery type	Rechargeable Lithium-Ion
Battery life (max)	20 h

Weight and Dimensions

Depth	82 mm
Width	50 mm
Height	20 mm
Weight	75.8 g