Need help?Do you have a question about the Garmin GTX 335R w/GPS and is the answer not in the manual?
General| Remote Mount | Yes |
|---|---|
| Frequency Band | 1090 MHz |
| ADS-B In | No |
| Operating Temperature | -20°C to +55°C |
| Interface | RS-232 |
| Type | Transponder |
| GPS | Yes |
| ADS-B | Yes |
| Power Output | 250W |
Outlines the Automatic Dependent Surveillance-Broadcast capabilities of the unit.
Lists physical characteristics, operating range, and altitude limits.
Provides technical specifications for the transponder transmitter and receiver.
Details the electrical power requirements and input current for the units.
Lists available model configurations, including GPS and ADS-B In options.
Lists items required for installation that are not provided.
Identifies specific tools required for installation and crimping.
Specifies required system configurations for ADS-B traffic/FIS-B displays.
Defines the priority order for using multiple data input sources.
Provides guidance on mounting locations and considerations for antennas.
Details the process for installing wire harnesses and connecting pins.
Provides instructions for assembling connectors and backshells.
Instructions for installing and removing panel and standard remote units.
Instructions for installing and removing vertical remote mount units.
Provides pinout details for the main board connector (J3251).
Details the pinout for the ADS-B board connector (J3252) on GTX 345.
Describes power connections, including aircraft power and configuration inputs.
Describes discrete inputs and outputs, and their configuration options.
Covers RS-232, ARINC 429, HSDB, and RS-422 interface details.
Details critical checks for mounting, wiring, and power before energizing.
Guides on entering configuration mode and adjusting system settings.
Covers configuration of RS-232, ARINC 429, discrete, and HSDB interfaces.
To Next Page
