Need help?Do you have a question about the Garmin GTX 345R w/GPS and is the answer not in the manual?
General| Interface | RS-232 |
|---|---|
| Certification | TSO certified |
| ADS-B | ADS-B Out and ADS-B In |
| Display | None (requires external display) |
| Frequency Bands | 1090 MHz |
| Power Requirements | 14-33 VDC |
| GPS | Built-in GPS/WAAS receiver |
| Power Consumption | 14W (typical) |
Provides a description of the GTX 3X5 transponder models and their features.
Provides instructions for installing the wire harness and building the wire harness.
Details the pinout for the main board connector (J3251).
Details the pinout for the ADS-B board connector (J3252).
Information on power input requirements and specifications.
Information on RS-232, ARINC 429, HSDB, and RS-422 serial interfaces.
Overview of the required GTX 3X5 configuration and checkout procedures.
Procedures for checking mounting, wiring, and power connections.
Instructions for entering and navigating configuration mode.
Guides configuration of audio output, volume, and alert types.
Configuration options for RS-232, ARINC 429, discretes, and HSDB interfaces.
Configuration settings related to ADS-B Out and In capabilities.
Information on accessing and interpreting diagnostic data.
Details CS-ACNS compliance for Elementary Surveillance (ELS) features.
Outlines CS-ACNS compliance for ADS-B Out data parameters and system approval.
To Next Page
