Why my computer never senses that the StreetPilot Garmin STREET PILOT 7200 is connected?
If your computer does not detect your Garmin Car Navigation system, try the following: First, unplug the USB cable from your computer. Then, load the USB drivers to your computer (see page 21 in the manual). Finally, plug the USB cable back into your computer and select USB Mass Storage.
What to do if I cannot find any drives named “GARMIN” in my list of drives for Garmin Car Navigation system?
If you cannot find any drives named “GARMIN” in your list of drives for your Garmin Car Navigation system, unplug the USB cable from your computer, load the USB drivers to your computer (see page 21 in the manual), and plug the USB cable into your computer again, selecting USB Mass Storage.
What to do if a message saying “Unsafe Removal of Device” appears when I unplug the USB cable from my Garmin Car Navigation system?
When you disconnect your Garmin Car Navigation system from your computer, double-click the Unplug or Eject icon in your system tray. Then, select “USB Mass Storage Device” and click Stop. Next, select the StreetPilot drives and click OK. Now you can safely disconnect your device.
General| Screen Size | 7 inches |
|---|---|
| Display Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| Maps Included | Yes |
| Bluetooth | Yes |
| Lane Assist | Yes |
| Voice Guidance | Yes |
| FM Traffic Receiver | Yes |
| SD Card Slot | Yes |
| Preloaded Maps | North America |
How to get support and assistance for your device.
Record serial number for service and registration purposes.
Step-by-step guide to finding restaurants using the device.
How to use navigation guidance during travel.
Search for destinations by entering a street address.
Locate points of interest by browsing the map interface.
Access the history of previously found locations.
Store favorite destinations for quick access.
Designate your primary residence or office as a Home Location.
Navigate and interact with the map display.
Monitor speed, distance, and travel time statistics.
Check GPS signal status and satellite information.
Build and save custom travel routes.
Modify existing route parameters and waypoints.
Incorporate intermediate destinations into a route.
Install computer drivers for device connection.
Copy data like music or maps to the device.
Safely disconnect the device from the computer.
Play your music collection on the device.
Play audiobooks from Audible.com.
Connect and view external video sources.
Set up and configure a vehicle reverse camera.
Establish reception for traffic data.
Reroute around traffic congestion or incidents.
Control audio output levels for prompts and media.
Adjust core device preferences and options.
Modify map display appearance and behavior.
Configure route calculation preferences and options.
Adjust display parameters like brightness and calibration.
Operate the device using the included remote.
Mount and secure the device in your vehicle.
Details on device hardware and performance.
Install the latest firmware for improved functionality.
Resolve common issues and problems with the device.
To Next Page