How to calibrate the touch screen on a Garmin StreetPilot c510 Car Navigation system?
If the touch screen on your Garmin Car Navigation system is not responding correctly, calibrate it. To do this, turn off the unit, then press and hold the Power button for about one minute until the Calibration screen appears. Follow the instructions displayed on the screen to complete the calibration.
What to do if the suction cup will not stay on my Garmin Car Navigation system windshield?
If the suction cup of your Garmin Car Navigation system won't stay on the windshield, clean both the suction cup and the windshield with rubbing alcohol. Then, dry them with a clean, dry cloth. After cleaning, mount the suction cup as described in the manual.
What to do if I get a message saying “Unsafe Removal of Device” when I unplug the USB cable from my Garmin c510 Car Navigation system?
When you are ready to disconnect your Garmin c510 Car Navigation system from your computer, double-click the Unplug or Eject icon in your system tray. Select USB Mass Storage Device, and click Stop. Select the c510 drives, and click OK. You can then disconnect your c510 from your computer.
How to fix Garmin c510 Car Navigation system that never gets satellite signals?
If your Garmin c510 Car Navigation system isn't acquiring satellite signals, take it outside, away from tall buildings and trees, and remain stationary for several minutes.
General| Brand | Garmin |
|---|---|
| Model | StreetPilot c510 |
| Category | Car Navigation system |
| Language | English |
To Next Page
