c510 Owner’s Manual 3
GettinG Started
Step 2: Conguring the c510
To turn on your c510, press and hold the Power button on the side of the unit.
Follow the on-screen instructions to congure your c510.
Step 3: Acquiring Satellites
Go outdoors to an open area, away from tall buildings and trees. Turn on the c510.
Acquiring satellite signals may take a few minutes.
The bars in the upper-left corner indicate satellite strength. When the bars are
green, your c510 has acquired satellite signals; you can nd a destination and go to it.
Step 4: Using the c510
A
Touch to nd a destination.
B
Touch to view the map.
C
Touch to view trafc incidents, when an
FM trafc receiver is connected.
D
Touch to adjust the c510’s settings.
E
Touch to adjust the brightness of the
screen.
A
B
C D E
To Next Page
Loading...
Need help?
General
