Garmin VECTOR 3 A03220 - Other Compatible Devices

Other Compatible Devices
Edge 810 and 510 Device Instructions
Pairing Vector 3 with Your Edge 810 or 510 Device
1
Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Turn on the Edge device.
3
From the home screen, select > Bike Profiles.
4
Select a profile.
5
Select .
6
Enable the sensor, and select Search.
7
Rotate the crank arm a few times.
When the sensor is paired with your Edge device, the sensor
status is Connected. You can customize a data field to display
Vector 3 data.
Entering the Crank Length
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector 3.
2
From the home screen, select > Bike Profiles.
3
Select a profile.
4
Select Crank Length > Manual.
5
Enter the crank length, and select .
Edge 800 Device Instructions
Pairing Vector 3 with the Edge 800 Device
1
Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Turn on the Edge device.
3
Select MENU > > Bike Settings > Bike Profiles.
4
Select a bike.
5
Select ANT + Power > Power Meter > Yes.
6
Rotate the crank arm a few times.
7
Select .
When the sensor is paired with your Edge device, a message
appears, and appears solid on the status page. You can
customize a data field to display Vector 3 data.
Entering the Crank Length
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector 3.
2
Select MENU > > Bike Settings > Bike Profiles.
3
Select a profile.
4
Select Bike Details > Crank Length > Custom.
5
Enter the crank length, and select .
Edge 500 Device Instructions
Pairing Vector 3 with the Edge 500 Device
1
Bring the Edge device within range (3 m) of the sensor.
7
Enable the sensor, and select Search.
8
Rotate the crank arm a few times.
When the sensor is paired with your Edge device, a message
appears, and appears solid on the main menu. You can
customize a data field to display Vector 3 data.
Entering the Crank Length
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector 3.
2
Hold MENU.
3
Select Settings > Bike Settings.
4
Select a bike.
5
Select Bike Details > More > Crank Length > Manual.
6
Enter the crank length.
Customizing the Data Fields
This procedure contains instructions for the Edge 500 device.
1
Hold MENU.
2
Select Settings > Bike Settings > Data Fields.
3
Select a page.
4
Select the number of data fields to appear on the page.
5
Select a data field.
fēnix
®
3 Device Instructions
Pairing Vector 3 with the fēnix 3 Device
1
Bring the fēnix device within 3 m of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Hold UP.
3
Select Settings > Sensors > Add New > Power.
4
Rotate the crank arm a few times.
5
Select your sensor.
When the sensor is paired with your fēnix device, the sensor
status changes from Searching to Connected.
Customizing the Data Fields
1
Hold UP.
2
Select Settings > Apps > Bike > Data Screens.
3
Select a screen.
4
Select a data field to change it.
Entering the Crank Length
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector 3.
2
Hold UP.
3
Select Settings > Sensors.
4
Select your sensor.
5
Select Crank Length.
6
Enter the crank length, and select .
fēnix 2 Device Instructions
Pairing Vector 3 with the fēnix 2 Device
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
Before you can pair ANT+ sensors, Bluetooth
®
technology must be turned off.
wireless
2
Turn on the Edge device.
3
Hold MENU.
4
Select Settings > Bike Settings.
5
Select a bike.
6
Select ANT + Power.
1
Bring the fēnix device within 3 m of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Hold MENU.
3
Select Settings > Sensors > Power.
4
Rotate the crank arm a few times.
6 Other Compatible Devices