Garmin Vector Series User Manual

Vector™ Quick Start Manual............................................................................................................. 2
Manuel de démarrage rapide du Vector™......................................................................................... 4
Manuale di avvio rapido di Vector™.................................................................................................. 6
Vector™ – Schnellstartanleitung........................................................................................................8
Guía de inicio rápido de Vector™.................................................................................................... 10
Manual de início rápido do Vector™................................................................................................ 12
Vector™ snelstartgids...................................................................................................................... 14
Vector™ Lynstartvejledning............................................................................................................. 16
Vector™ aloitusopas........................................................................................................................ 18
Hurtigstartveiledning for Vector™.................................................................................................... 20
Vector™ Snabbstartshandbok......................................................................................................... 22
Skrócony podręcznik użytkownika Vector™.................................................................................... 24
Garmin
®
, Edge
®
, and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Vector™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks
may not be used without the express permission of Garmin.
This product is ANT+™ certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
August 2014 190-01450-91_0DPrinted in Taiwan
TA-2013/403

Garmin Vector Series Specifications

General

Type	Power Meter Pedals
Measurement	Power, Cadence, Cycling Dynamics
Battery Type	CR2032
Battery Life	Up to 120 hours
Accuracy	+/- 1%
Power Measurement	Yes
Cadence Measurement	Yes
Water Rating	IPX7
Connectivity	Bluetooth, ANT+
Max Rider Weight	105 kg
Cycling Dynamics	Yes
Cleat Type	Look Keo-compatible
Measurement Metrics	Platform Center Offset

Summary

Installing Vector Components

Preparing the Crank Arms

Confirm bike compatibility, remove pedals, and clean crank arm threads before installation.

Determining Pedal Pod Clearance

Ensure pedal pod contacts crank arm only at mounting face to prevent fracture; use washers if needed.

Installing the Pedal Pod and Pedal

Installing the Shoe Cleats

Adjusting the Release Tension

Paring Vector with Your Edge 1000

Your First Ride

Entering the Crank Length

Activate Vector by rotating pedals, then set crank length via the Edge device menu.

Setting the Installation Angle

Perform a short ride and accelerate to set the sensor installation angle for accurate data.

Performing a Static Zero Calibration

Calibrate the static zero reference with the bike upright and pedals untouched.

Calibrating Vector Before Each Ride

Troubleshooting

Getting the Owner's Manual

Download the latest owner's manual from the Garmin support website.

Vector Storage

Remove and store Vector in the product box when transporting or for extended periods.