Garnet SEELEVEL SPECIAL 808-P2 User Manual

garnetinstruments.com
1-800-617-7384
CANADA
Garnet Instruments
286 Kaska Road
Sherwood Park, AB T8A 4G7
USA
Garnet US Inc.
5360 Old Granbury Road
Granbury, TX 76049
Tank Truck Level Gauge
IMPORTANT OPERATOR INFORMATION
DATE INSTALLED: _______________________________________________________________________________
UNIT NUMBER: _________________________________________________________________________________
COMPARTMENT: _______________________________________________________________________________
DISPLAY CALIBRATION UNITS (e.g. inches, gallons): ___________________________________________
MINIMUM TANK READOUT: ___________________________________________________________________
MAXIMUM TANK READOUT: ___________________________________________________________________
ALARM POINT (IF APPLICABLE): ________________________________________________________________
SPILLSTOP EMPTY POINT (IF APPLICABLE): ____________________________________________________
SPILLSTOP HORN POINT (IF APPLICABLE): _____________________________________________________
SPILLSTOP SHUTDOWN POINT (IF APPLICABLE): ______________________________________________
AUTOMATIC ALARM: WARNING LEVEL: ____________________________________________________
EMPTY LEVEL: ________________________________________________________
TM
MODEL 808-P2
Enhanced Alarm Feature Version

Garnet SEELEVEL SPECIAL 808-P2 Specifications

General

Model	SEELEVEL SPECIAL 808-P2
Category	Measuring Instruments
Manufacturer	Garnet Instruments
Display	Digital
Power Supply	12V DC
Protection Rating	IP67

Summary

Overview of the Tank Truck Level Gauge

Enhanced Alarm Features of the 808-P2 Gauge

Key Display Diagnostics and Error Codes

Explains diagnostic messages like "bL:xx", "Err", "Prob", "Sun" for identifying issues.

Description of the SeeLevel Gauge Components

Unique Features of the SeeLevel Gauge

Mechanical Assembly and Diagram

Sender Bar Material and Chemical Compatibility

808-P2 Gauge Installation Procedures

Automatic Alarm System Wiring Diagram

Setting Product Density on the Gauge Display

808-P2 Gauge Programming and Configuration

Programming Gauge Display in Inches

Step-by-step guide for setting the gauge display resolution to inches and configuring alarm points.

Copying Gauge Calibration to Another Unit

Instructions for transferring calibration data from one gauge display to another unit.

Programming Gauge from Calibration Table

Procedure for programming the gauge display using provided calibration values from a table.

Troubleshooting Guide for SeeLevel Gauge

How to Test the Sender Bar

Detailed steps for testing the sender bar's functionality and output signals.

How to Test the Display Unit

Procedures for testing the display unit for proper operation and response.

Technical Specifications for 808-P2 Gauge

Service and Warranty Information

Disclaimer of Hardware Warranty

Outlines Garnet's warranty coverage, exclusions, and limitations for hardware.

Limitations on Product Warranties

Details warranty limitations, return process, and required RMA for service.