Power Switch - To turn the detector on,
set the switch to the ON position. A brief
audio and Red LED alarm will occur, indi-
cating the unit is on. The SuperScanner
is immediately ready for use.
Audio Alert - The speaker provides a
clear audible sound whenever metal is
detected. When using the optional ear-
phone accessory, the audio alert will only
sound through the earphone.
The Audio Alert also indicates battery
condition. When approximately 10% of
battery life remains, the sound when
metal is detected changes from a warble
to a steady tone.
LED Array - When the Power Switch is
turned on, the Green Light will remain
illuminated, as long as the unit is on.
When approximately 10% of battery life
remains, the Amber Alert Light will turn
4 - Garrett Metal Detectors
To Next Page
Loading...
