on, indicating the battery needs to be
replaced or recharged. Approximately
one (1) hour of operational time remains
when the amber LED is initially activated.
Whenever metal is detected the Red
LED Light will illuminate.
Interference Elimination Button - The
detector is factory set for maximum sen-
sitivity to detect the smallest of items.
This high level of sensitivity may produce
alarms when approaching a floor con-
taining rebar. Press and hold this button
to decrease sensitivity to a level that
does not respond to the rebar. Release
button and detector returns to normal
sensitivity.
Earphone/Recharger Jack - An ear-
phone is available (see Accessories) for
"silent" operation or for use in noisy envi-
ronments. The rechargeable NiMH bat-
tery is also recharged through this jack.
SuperScanner - 5
To Next Page
Loading...
