EasyManua.ls Logo

GarrettCom Magnum 3000 - Ordering Information

GarrettCom Magnum 3000
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Magnum 3000 Stackable Hubs Installation and User Guide (07/06)
4
www GarrettCom com
..
1.3 Ordering Information
Magnum 3000 Stackable Hubs and Concentrators
Magnum 3024 Base Chassis with 24 RJ-45 ports, shielded connectors
Magnum 3012 Base Chassis with 12 RJ-45 ports, shielded connectors
ETSI and NEBS-certified models, -48VDC powered
Magnum 3012-NEBS NEBS Level 3 tested and certified with -48VDC power supply
Base Chassis with 12 RJ-45 ports
Magnum 3024-NEBS NEBS Level 3 tested and certified with -48VDC power supply
Base Chassis with 24 RJ-45 ports
Note: for Dual-Source DC and other special options, RFQ to sales@garrettcom.com
Network Management Options:
Magnum 3000-MB SNMP option, Embedded Agent Board
Magnum 3000-AGT SNMP option, Embedded Agent Box as a separate stack unit
Magnum 3000-NMS "SNMPc" PC / Windows-based Network Management
Software product from Castle Rock Computing.
Port Modules (PMs)**:
Magnum RPM-BNC Module with 1 BNC connector, internal termination switch
Magnum RPM-TP Module w/ 1 shielded female RJ-45 connector + up-link switch
Magnum RPM-AUI Module with 1 AUI (DB-15 female) connector, with slide lock
Magnum RPM-DTE Module with 1 DTE (DB-15 male) connector, with lock posts
Magnum RPM-FST Module w/ mm* Fiber ST “twist” 10BASE-FL dual connector
Magnum RPM-SMF Module w/ single-mode Fiber connector
Magnum BPM-BNC Local Bridge Module with 1 BNC connector
Magnum BPM-AUI Local Bridge Module with 1 AUI connector
Magnum BPM-FST Local Bridge Module with mm* Fiber ST connector
Magnum BPM-TP Local Bridge Module with 1 RJ-45 connector + uplink switch
Magnum PM-FP Face Plate - cover for unused front slots
* mm = multi-mode.
** These items must be included to convey configuration information to the factory. For
example, to order a Model 3024 Hub with a BNC-type RPM option factory installed in the
rear bonus port slot, you must include Model "3024-PM" and Model RPM-BNC as separate
line items on the same order, in order to specify that the RPM-BNC is to be factory-configured
in the rear bonus port.
GARRETTCOM, INC.reserves the right to change specifications, performance
characteristics and/or model offerings without notice.

Table of Contents

Related product manuals