What to do if my GAS GAS Motorcycle engine starts but stops again?
If your GAS GAS Motorcycle engine starts but then stops, it could be due to an incorrect air supply. Try closing the choke, cleaning the fuel tank breather hose, and adjusting the air filter duct. Another possible cause is a lack of fuel, so ensure that you fill the fuel tank.
What causes GAS GAS Enduro 2T 250 2018 Motorcycle engine to overheat and how to fix it?
If your GAS GAS Motorcycle engine overheats, it could be due to a lack of coolant. Add coolant and check the cooling system for leaks. Alternatively, the radiator might be clogged or dirty, so clean the radiator fins or replace them if necessary.
What to do if the electric starter does not crank on my GAS GAS Motorcycle?
If the electric starter on your GAS GAS Motorcycle doesn't crank, it might be due to a blown starter relay fuse. Remove the seat and check the fuse. Another possibility is that the battery is not charged, so remove the seat and check the charge.
General| Displacement | 249.3 cc |
|---|---|
| Bore x Stroke | 66.4 x 72 mm |
| Ignition | Electronic |
| Transmission | 6-speed |
| Front Tire | 90/90-21 |
| Rear Tire | 140/80-18 |
| Fuel Tank Capacity | 9.5 liters |
| Seat Height | 960 mm |
| Cooling | Liquid |
| Final Drive | Chain |
| Engine Type | 2-stroke single cylinder |
| Clutch | Wet, multi-disc |
| Front Suspension | 48 mm |
| Front Brake | 260 mm disc |
| Rear Brake | 220 mm disc |
| Wheelbase | 1485 mm |
| Starter | Kick |
| Frame | Steel |
Important safety notices and precautions for operating the motorcycle.
Crucial safety precautions and dangers to be aware of before operating the motorcycle.
Critical checks for fuel, oil, coolant, brakes, tires, and controls before riding.
Overview of maintenance tasks with recommended intervals for checks and replacements.
Adjusting front and rear suspension for rider weight, terrain, and handling.
Diagnosing and resolving common engine and transmission starting, running, and performance problems.
To Next Page