GAS GAS EC 2T 20012501300cc RACING User Manual

GAS GAS EC 2T 20012501300cc RACING

107 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Table of Contents

Questions and Answers:

W
williamsryanAug 1, 2025
Why my GAS GAS EC 2T 20012501300cc RACING engine does not start?
- A
  Alan HarmonAug 1, 2025
  If your GAS GAS Motorcycle engine won't start, it might be due to several reasons. If the motorcycle has been inactive for a long time, unload the old fuel and fill the tank with new fuel. Another cause may be a dirty or wet spark plug, so you should clean or dry it, replacing it if necessary. If the engine is flooded, close the fuel tap, remove the spark plug, put a gear and push the bike several feet with the throttle fully open to empty the pre-compression pan. Then, mount the spark plug and attempt to start the bike. If the air/fuel mixture is incorrect, clean the fuel tank breather and the air filter. Also, verify and correct the exhaust valve if it's opened.
P
paulterrellAug 8, 2025
What to do if my GAS GAS EC 2T 20012501300cc RACING engine starts but then stops?
- N
  Nicholas WhiteAug 9, 2025
  If your GAS GAS Motorcycle engine starts but then stops, it could be due to an incorrect air supply. In this case, close the starter, clean the fuel tank air vent, and adjust the air cleaner duct. Another reason may be lack of fuel, so fill up the fuel tank.
C
collinedwardsAug 16, 2025
Why does my GAS GAS EC 2T 20012501300cc RACING Motorcycle engine overheat?
- J
  Joy WilliamsAug 16, 2025
  If your GAS GAS Motorcycle engine overheats, it could be due to insufficient coolant. Fill up the coolant and verify the refrigeration system's watertightness. Alternatively, the radiator may be dirty or partially restricted. Clean the radiator fins or replace the radiator.
A
acunninghamAug 23, 2025
What to do if the electric starter motor does not crank on my GAS GAS EC 2T 20012501300cc RACING?
- R
  robertsemilyAug 23, 2025
  If the electric starter motor of your GAS GAS Motorcycle does not crank, it could be due to a blown starter relay fuse. To solve this, remove the seat and check the fuse. Another possible cause is a discharged battery. Remove the seat and check the battery voltage to resolve this.

GAS GAS EC 2T 20012501300cc RACING Specifications

General

Manufacturer	GAS GAS
Transmission	6-speed
Engine Type	Single cylinder, 2-stroke
Cooling	Liquid cooled
Fuel System	Carburetor
Brakes Front	Disc brake
Brakes Rear	Disc brake

Summary

General Information and Vehicle Overview

Safety Notices and Warnings

Highlights crucial safety information and warnings for operating the motorcycle.

Preliminary Safety Warnings

Covers essential safety precautions and warnings before operating the vehicle.

Controls and Components Location

EC 2T 200/250/300cc RACING Models Component Locations

EC 2T 250/300cc RACING E-START Models Component Locations

EC 2T 200/250/300cc RACING “Cross Country” Models Component Locations

EC 2T 250/300cc RACING E-START “Cross Country” Models Component Locations

XC 2T 200/250/300cc RACING (USA) Models Component Locations

XC 2T 250/300cc RACING E-START (USA) Models Component Locations

Technical Specifications

Provides detailed technical specifications for various motorcycle models.

EC 2T 200/250/300cc RACING & Replica Factory Specs

Lists detailed specifications for EC 2T 200/250/300cc RACING and Replica Factory models.

EC 2T 250/300cc RACING E-START Specs

Details specifications for the EC 2T 250/300cc RACING E-START model.

XC 2T 200/250/300cc RACING (USA) Specs

Provides specifications for the XC 2T 200/250/300cc RACING (USA) model.

XC 2T 250/300cc RACING E-START (USA) Specs

Lists specifications for the XC 2T 250/300cc RACING E-START (USA) model.

Torque Values

Specifies torque values for various fasteners on the motorcycle.

General and Chassis Torque Specifications

Torque values for general fasteners and chassis components.

Engine Torque Specifications

Torque values for various engine components.

E-START Engine Torque Specifications

Torque values specific to E-START engine components.

Operating Instructions

Covers essential procedures for operating and maintaining the motorcycle.

Starting and Break-in Procedures

Step-by-step instructions for starting the engine and initial break-in.

Daily Inspection Checklist

Essential pre-ride checks to ensure the motorcycle is safe and ready.

Service and Maintenance

Maintenance Schedule

Basic Component Maintenance

Air Filter Service and Cleaning

Carburetor and Transmission Oil Service

Coolant System and Radiator Maintenance

Brake System Maintenance and Adjustment

Suspension System Maintenance

Chain Tension, Tire Checks, and Battery Maintenance

Settings and Adjustments

Carburetor Adjustment Procedures

Detailed guide on adjusting carburetor settings for optimal performance.

CDI Map and Secondary Transmission Ratio

Suspension Adjustment Guide

Comprehensive guide to adjusting front and rear suspension settings.

Troubleshooting

Engine Starting and Running Issues

Diagnoses and solutions for engine not starting or running problems.

Engine Performance and Noise Issues

Drivetrain and Chassis Stability Issues

Brake and Lighting System Malfunctions

Related product manuals

Preview: HALLEY 2T EC-SM - PART LIST 2009

HALLEY 2T EC-SM - PART LIST 2009

Preview: GAS GAS EC-2T - PART LIST 2011

GAS GAS EC-2T - PART LIST 2011

Preview: GAS GAS EC 200

Preview: GAS GAS EC 2008

GAS GAS EC 2008

Preview: GAS GAS EC - 2005

GAS GAS EC - 2005

Preview: GAS GAS EC - 2006

GAS GAS EC - 2006

Preview: GAS GAS EC - 2004

GAS GAS EC - 2004

Preview: GAS GAS EC 250 2021

GAS GAS EC 250 2021

Preview: GAS GAS ENDURO 4T EC 2014

GAS GAS ENDURO 4T EC 2014

Preview: GAS GAS EC ROOKIE - 2005

GAS GAS EC ROOKIE - 2005

Preview: GAS GAS EC 125