Do you have a question about the GAS GAS EC - 2004 and is the answer not in the manual?
Year | 2004 |
---|---|
Manufacturer | GAS GAS |
Model | EC |
Cooling System | Liquid cooled |
Transmission | 6-speed |
Rear Suspension | Monoshock with linkage |
Front Brakes | Single disc |
Rear Brakes | Single disc |
Fuel Capacity | 9.5 liters |
Engine Type | Single-cylinder, 2-stroke |
Clutch | Wet multi-plate |
Frame | Chromoly |
Front Suspension | 43 mm |
Special instructions for personal injury or loss of life.
Special instructions to prevent equipment damage or destruction.
Points of particular interest for efficient and convenient operation.
Procedures for checking, cleaning, adjusting, and replacing the spark plug.
Guidance on maintaining the proper transmission oil level and changing the oil.
Instructions for inspecting, cleaning, or replacing the air cleaner element.
Guide for inspecting, checking play, and adjusting the throttle cable.
Adjusting the carburetor for optimal performance, including idling.
Proper clutch lever play adjustment and maintenance.
Instructions for muffler and silencer packing replacement.
Checking, adjusting slack, and lubricating the drive chain.
Adjusting front brake lever play and rear brake pedal position.
Inspecting and changing brake fluid, and checking for leaks.
Ensuring proper steering adjustment for free turning and no play.
Equalizing air pressure in the front fork legs.
Adjusting the rebound dampening knob located on the fork top.
Adjusting fork oil level for proper fork travel and performance.
Adjusting the rebound dampening on the rear shock absorber.
Adjusting the compression dampening on the rear shock absorber.
Adjusting spring preload or replacing the rear shock absorber spring.
Adjusting tire pressure for traction, handling, and tire life.
Checking spoke tightness and rim condition for wheel integrity.
Adjusting carburetor settings based on temperature and altitude for optimal engine performance.
Adjusting the slow jet and air screw for the low throttle range mixture.
Adjusting the jet needle position to control fuel flow in the mid-throttle range.
Applying correction factors for altitude and temperature to carburetor settings.
Adjusting fork oil level to affect fork travel and prevent bottoming.
Identifying and correcting common front fork stiffness or softness issues.
Identifying and correcting rear shock stiffness or softness problems.
Guidance on setting up suspension based on rider and conditions.
Daily checks before riding for safety and readiness.
Maintenance after races or specific track conditions (dusty/muddy).
Details of the warranty provided by GAS GAS Motos S.A.
Warranty duration, notification, and purchaser responsibilities.
Items excluded from warranty and procedures for handling defects.