Need help?Do you have a question about the GAS GAS EC 250 2021 and is the answer not in the manual?
General| Displacement | 249.3 cc |
|---|---|
| Bore x Stroke | 66.4 x 72 mm |
| Transmission | 6-speed |
| Cooling System | Liquid cooled |
| Seat Height | 960 mm |
| Ground Clearance | 370 mm |
| Engine Type | 2-stroke single cylinder |
| Front Suspension | 48 mm |
| Rear Suspension | Monoshock |
| Front Brake | 260 mm disc |
| Rear Brake | Hydraulic disc, 220 mm |
| Fuel Capacity | 9.5 L |
| Frame | Steel |
| Starter | Kick starter |
Explains warning symbols and their severity levels.
Prohibits modifications to noise control systems and lists tamper-related acts.
Emphasizes the importance of wearing appropriate protective gear for safety.
Outlines warranty conditions and voiding factors.
Advises on proper fuel and auxiliary substance usage and environmental considerations.
Identifies major components on the front left side of the motorcycle.
Identifies major components on the rear right side of the motorcycle.
Details the location of the VIN for identification.
Specifies the location of the engine number for identification.
Describes the operation and function of the clutch lever.
Explains the function and states of the engine stop button.
Details the operation of the headlight switch for different beam settings.
Explains the function and positioning of the gear shift lever.
Describes how to lock and unlock the steering for security.
Provides an overview of the instrument cluster's components and layout.
Guides on how to adjust settings like units, clock, and service display.
Explains how to view and reset speed, time, and trip distances.
Essential pre-ride checks and safety advice before initial use.
Guidelines for the engine break-in period to ensure longevity.
Advice on adjusting the vehicle for specific challenging riding environments.
Daily pre-ride checks to ensure safe operation.
Step-by-step instructions for starting the motorcycle engine.
Guidance on gear shifting, proper riding techniques, and engine care.
Instructions and warnings related to safe and effective braking.
Lists maintenance tasks required at specific intervals.
Lists additional recommended maintenance tasks for optimal performance.
How to adjust suspension based on rider weight for optimal handling.
Details on adjusting shock absorber low-speed compression for ride comfort.
Details on adjusting shock absorber high-speed compression for performance.
Step-by-step guide to adjust the rear shock absorber spring preload.
Procedure for removing air pressure from the front fork legs.
Instructions for safely removing the front fork legs from the motorcycle.
Steps for cleaning the motorcycle's drive chain to maintain performance.
How to check and adjust the drive chain tension for proper operation.
Steps for safely removing the front wheel from the motorcycle.
Steps for safely installing the front wheel onto the motorcycle.
Guidance on inspecting tires for wear, damage, and tread depth.
Instructions for checking and adjusting tire pressure for optimal riding.
Procedure for safely disconnecting and removing the 12V battery.
Procedure for correctly installing the 12V battery.
Guidelines for properly charging the 12V battery to maintain its service life.
Steps for replacing a burnt-out headlight bulb.
How to check coolant level and antifreeze concentration.
Procedure for safely draining the engine's coolant.
Steps for refilling the cooling system with the correct coolant.
How to check and adjust the throttle cable play for smooth operation.
How to adjust the engine's idle speed for optimal performance.
Procedure to reprogram the engine for different ambient air pressures.
How to switch between different engine performance maps.
Steps for replacing the fuel filter screen to ensure clean fuel delivery.
How to check the 2-stroke oil level in the dedicated tank.
Procedure to prime the oil pump for lubrication system readiness.
Procedure for cleaning the oil screen to maintain lubrication system efficiency.
Steps for draining and refilling the transmission (gear) oil.
General guidelines for cleaning the motorcycle to maintain its condition.
Specific maintenance actions required for winter storage or use.
Steps for preparing the motorcycle for long-term storage.
Procedures for getting the motorcycle ready after a period of storage.
Provides detailed specifications for the motorcycle's engine.
Lists technical specifications related to the motorcycle's frame and suspension.
Details specifications for the motorcycle's electrical components.
Lists the correct torque values for chassis-related fasteners.
Indicates error conditions requiring immediate intervention.
Indicates error conditions requiring prompt intervention or driving aids.
Reflects informational symbols and status indicators.
To Next Page