Need help?Do you have a question about the GAS GAS Pampera and is the answer not in the manual?
General| Transmission | 6-speed |
|---|---|
| Rear Suspension | Monoshock |
| Engine Type | Single-cylinder, 2-stroke |
| Cooling System | Liquid cooled |
| Starter | Kick starter |
| Front Suspension | Telescopic fork |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
Covers critical warnings, attention points, and important notes for safe operation.
Ensure the frame serial number on the motorcycle matches documentation.
Locate and use the oil drain plug on the left rear of the skidpan for oil evacuation.
Check fuel valve position and procedure for filling the engine oil.
Lubricate the shift lever and rear brake pedal pivots for smooth operation.
Lubricate the footpegs and the kickstart lever pivot.
Clean and lubricate the drive chain and throttle control mechanism.
Check sparkplug condition and adjust throttle cable free play.
Adjust carburetor mixture and clean the air filter element.
Adjust the clutch and front brake levers for optimal reach and free play.
Periodically check the brake fluid level in both reservoirs.
Adjust the drive chain tension to the specified movement at the tensioner block.
Eliminate any air from the braking system by loosening bleed nipples.
Clean the carburetor jets and passages and check the float level.
Check the operating tolerance between the cylinder and piston.
Learn how to remove the piston and access the water pump turbine.
Inspect clutch discs for wear and clutch springs for length.
Inspect brake pads for wear and identify instrument panel components.
Check lighting, indicators, and understand the anti-theft system operation.
Check rear suspension linkage and tire pressure and condition.
Periodical care and checking of all functions before the motorbike.
Riding your motorbike safely depends on rider intelligence and reasoning.
To Next Page