Gasmate Odyssey - ASSEMBLY INSTRUCTIONS; Step 1: Leg Attachment; Step 2: Front Skirt

98
ASSEMBLY INSTRUCTIONS
K
CC x 4
BB x 4
AA x 4
Remove any transit protection material.
STEP 2
Attach the front skirt with the fasteners on both
legs as shown.
T
L
M
STEP 1
Loosen the pre installed screws. Position the legs
as shown and secure with both of the fasteners.
Place the feet on the legs as shown and secure
with the self tapping screw. Plug the holes as
shown.
CC x 4
BB x 4
AA x 4
Pre
installed
screw (4)
Self
Tapping
Screw
MM x 2
Q