Gasmate Odyssey - ASSEMBLY INSTRUCTIONS; Step 3: Front Panel; Step 4: Back Panel

98
CC x 2
BB x 2
AA x 2
Pre installed
screw (4)
J
STEP 3
Loosen the pre installed screws.
Position the front panel and
secure with the fasteners as
shown on both sides.
I
Pre installed screw (4)
STEP 4
Loosen the pre installed screws. Position the
back panel, DO NOT retighten the fasteners.
Pre
installed
screw (4)
Self
Tapping
Screw
MM x 2