29
BEFORE FIRST USE
WARNING: DO NOT let young children play with the appliance, or any
part of it, or the packaging!
The appliance may emit a little smoke and a characteristic smell, when you turn it
on for the first time. This is normal and will stop soon. Ensure sufficient ventilation.
1. Unpack the appliance and all accessories carefully. Check that no parts are
damaged or missing. See: “Knowing Your »Design Bread Maker Advanced«”.
2. Carefully remove all shipping materials and promotional materials, but DO NOT
remove any warning labels or the model label. Especially ensure that there are
no foreign objects (e.g. packaging material) in the bread pan, heating compart-
ment, or the coupling at the bottom of the bread pan.
WARNING: Always switch OFF (hold the START/STOP button touched until a
beep sounds), unplug, and leave the appliance cool down, before cleaning. Do not
immerse the housing or power cord in water or other liquids or spill any liquids on/
in the housing or power cord. Do not place the housing or power cord in an
automatic dishwasher.
Always ensure that the exterior of the bread pan and the
heating compartment are clean and completely dry before inserting the bread pan.
The ice bucket may never come in contact with any hot surfaces or hot
liquids and may never be heated. Otherwise, the ice bucket could burst,
causing severe injuries and damage.
For cleaning only use lukewarm dishwa-
ter.
3. Before first use and after a longer period of storage, clean the appliance and its
parts. See: “Care and Cleaning”.
4. Ensure that the exterior of the bread pan is completely dry and clean. Lock the
bread pan left empty within the heating compartment (see: “Operation”). Select
the Bake program (16) and let the appliance operate for approx. 10 minutes.
While heating, a characteristic smell and a little smoke escaping from the appli-
ance will be normal.
5. Switch OFF the appliance, unplug, and leave the appliance cool down to room
temperature. Thereafter clean the bread pan and heating compartment of the
bread maker again (see: “Care and Cleaning”).
6. Put some butter or marge on a kitchen cloth and wipe the non-stick coatings of
the bread pan and kneading paddle to prepare the non-stick coatings for use.
The appliance is ready for use now.
To Next Page
Loading...
Need help?
General
