Why is my Gastroback Coffee Grinder making a loud pumping noise?
If your Gastroback Coffee Grinder is making a loud and continuous pumping noise, the water tank may be empty or not securely in place.
Why is my Gastroback Coffee Grinder making a pumping sound?
If your Gastroback Coffee Grinder is making a pulsing or pumping sound while extracting espresso or steaming milk, this is the normal operation of the 15 bar pump, so no action is required.
What to do if grinder does not start when micro switch is pressed on my Gastroback Coffee Grinder?
If the grinder on your Gastroback Coffee Grinder doesn't start when the micro switch is pressed and the 'Filter Size' lights are cycling, the bean hopper safety interlock might be open because the hopper is not correctly in place. Remove the hopper, check for any debris, and replace it in the correct location.
What to do if my Gastroback Coffee Grinder is not working?
If your Gastroback Coffee Grinder appears to be on but ceases to operate, the safety thermal-cut may have activated due to the pump or grinder overheating. Turn the machine off and allow it to cool for about 30 - 60 minutes.
Why are the steam and hot water lights flashing on my Gastroback Coffee Grinder?
If the steam and hot water lights are flashing on your Gastroback Coffee Grinder when it's switched on, the steam dial is not in the STAND BY position. Turn the steam dial to the STAND BY position; the machine will then commence its normal heat-up procedure.
General| Voltage | 220-240 V |
|---|---|
| Capacity | 250 grams |
| Power | 150 watts |
| Dimensions | 20 x 15 x 30 cm |
| Color | Black |
Safety guidelines specific to electrical components and usage.
Step-by-step guide for assembling the espresso machine components.
Detailed procedure for brewing espresso shots.
Instructions for texturing milk for coffee beverages.
Procedure for fitting and changing the water filter.
Steps for performing the automatic cleaning cycle.
To Next Page