52
The machine will stop after 2 CUP volu-
me has been extracted and will return to
STANDBY mode.
MANUAL
The MANUAL button allows you to control
the espresso pour volume to suit your pre-
ference.
Press MANUAL button once to start the es-
presso extraction. The extraction will start
using the low pressure pre-infusion.
Press MANUAL button again to stop extrac-
tion.
NOTE: To stop an extraction at any time,
press the 1 CUP, 2 CUP or MANUAL but-
ton and the machine will return to STANDBY
mode.
Steam
For instant steam, move STEAM LEVER to-
OPEN position. The Steam LED will be On.
To turn STEAM off, move STEAM LEVER to
CLOSED position. The machine will return to
STANDBY mode.
sed steam can still be released, even
Hot Water
For instant hot water, rotate the HOT WATER
dial to OPEN position. The Hot Water LED
will be On.
To turn HOT WATER off, rotate the HOT WA-
TER dial to CLOSED position. The machine
will return to STANDBY mode.
NOTE:You cannot run hot water and extract
espresso at the same time.
LCD PROGRAMMING
FUNCTIONS
To program the machine, press MENU but-
ton once. The LCD will display all program-
ming functions. Continue to press MENU
button to select your desired function.
At any stage during programming, press
EXIT to return to STANDBY mode.
NOTE:The MENU button is disabled when
the machine is in coffee making, Steam or
Hot Water mode.
To Next Page
Loading...
Need help?
General
