Need help?Do you have a question about the GASTRON GIR-3000 and is the answer not in the manual?
Technical details including measuring type, range, accuracy, and approvals.
Electrical parameters, input voltage, output current, relay contact ratings, and wiring.
Layout and description of terminals and connectors on the Main PCB.
Wiring connections for power supply and 4-20mA output terminals, including source/sink methods.
Details on relay and communication terminal connections, including RS485 and relay mode settings.
Procedures for Zero Calibration and Span Calibration to ensure measurement accuracy.
Configuration of alarm operating modes, relay types, alarm levels, deadbands, and time delays.
List of error messages, their conditions, and their causes.
Table of fault causes and recommended coping measures for resolving issues.
General| Measurement Range | 0 to 3000 ppm |
|---|---|
| Resolution | 1 ppm |
| Response Time | Less than 30 seconds |
| Accuracy | ±5% of reading or ±30 ppm, whichever is greater |
| Operating Temperature | 0 to 50°C |
| Operating Humidity | 10 to 90% RH (non-condensing) |
To Next Page
