62
Replacing Gateway 450ROG Components
www.gateway.com
Replacing the power board
Tools you need to complete this task:
Screws removed during this task:
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 2.5 mm
(keyboard)
4 chrome 2.5 × 4 mm
(cooling assembly)
3 chrome 2.5 × 4 mm
(LED indicator panel)
13 chrome 2.5 × 4 mm (bottom, palm rest)
2 chrome 2.5 × 2.5 mm (palm rest)
1 chrome 2.5 × 4 mm
(hard drive kit)
1 chrome 2.5 × 7 mm
(grounding wire)
4 chrome 2.5 × 4 mm
(power board)
To Next Page
Loading...
