6
www.gateway.com
Starting the monitor
To start the monitor:
1 Press the power button on the monitor. The power LED turns on.
2 Turn on your computer.
3 After your computer is running, the power LED on the monitor should be green. Allow
about 10 seconds for the display image to appear. If the power LED is not green or
you do not see a display image, check the connections. For more troubleshooting
information, see “Troubleshooting” on page 17.
4 Adjust the tilt of the monitor for the best viewing angle.
5 After you see the Windows desktop, press the AUTO/SET button to automatically adjust
the display image to the ideal settings.
6 Use the on-screen display (OSD) to adjust other monitor settings. For more
information, see “Adjusting monitor settings” on page 7.
Important When adjusting the monitor settings, always press the AUTO/SET
button before entering the OSD. This will automatically adjust the
display image to the ideal settings for the current screen resolution.
Power button
and LED
To Next Page
Loading...
Need help?
General
