www.gateway.com
41
8 Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
Replacing the diskette drive
To replace the diskette (floppy) drive:
1 Remove the back panel by following the instructions in
“Opening the case” on page 35.
2 Remove the power supply by following the instructions
in “Replacing the power supply” on page 40. You do not
need to unplug the power supply from the system
board.
3 Pull the diskette drive release latch out (toward you).
8512032.book Page 41 Tuesday, January 9, 2007 1:47 PM
To Next Page
Loading...
