Need help?Do you have a question about the Gaymar T/PUMP TP400 Series and is the answer not in the manual?
Instructions for attaching, disconnecting, and operating Clik-Tite connectors.
Step-by-step guide for filling, setting temperature, and powering on the T/Pump.
Steps for safely turning off and disconnecting the T/Pump.
Instructions for short-term and long-term storage of the T/Pump.
Methods for draining and cleaning the T/Pump unit.
Information on recommended pads and available accessories.
Explanation of the thermistor-actuated temperature controller and safety thermostats.
Details on the pump motor, hose fittings, and internal fluid dynamics.
Overview and purpose of performing functional and safety checks.
Recommended frequency for performing functional and safety checks.
List of specialized tools needed for functional testing.
Procedure for inspecting the T/Pump's physical integrity.
Instructions for periodic lubrication of the pump motor.
Steps for correctly connecting the TPCI test cover.
Procedure for measuring the unit's ground resistance.
Method for measuring electrical current leakage.
Procedure to verify the functionality of the tip-over safety switch.
Procedure to measure the minimum required water flow rate.
Steps to verify the unit maintains the set operating temperature.
Procedure to test the function of the manifold and well backup thermostats.
Steps to identify and correct any water leaks after testing.
Instructions for reassembling the T/Pump cover and gasket.
Steps for safely removing the T/Pump unit cover.
Procedure for disassembling and removing the pump motor.
Steps for safely removing and replacing the heater element.
Procedure for accessing and removing the printed circuit board.
Steps for replacing the manifold backup limit thermostat.
Important note regarding the replacement of the well backup thermostat.
Procedure for replacing the entire tray assembly.
List of necessary equipment and tools for calibration.
Step-by-step instructions for calibrating the T/Pump unit.
General| Model | TP400 Series |
|---|---|
| Category | Medical Equipment |
| Power Supply | 120 VAC, 60 Hz |
| Dimensions | 12 x 12 x 12 inches |
| Sleeve Options | Various sizes available |
To Next Page
