Need help?Do you have a question about the Gaymar T/PUMP TP500 and is the answer not in the manual?
Describes the dual hose with connectors for pad attachment.
Explains the switch that shuts off the heater if the pump tips.
A label for adding hospital-specific identification.
Details the circuit breaker function and visual indicator.
Indicates when the pump and heater have been turned off due to high temperature.
Describes limit thermostats that shut off the unit if high temperature limits are exceeded.
Instructions for attaching and disconnecting Clik-Tite connectors.
Instructions for attaching and disconnecting Colder-style connectors.
Step-by-step guide for starting the heat therapy system.
Steps for safely turning off and disconnecting the heat therapy system.
Guidelines for storing the unit for short periods.
Guidelines for storing the unit for extended periods.
Instructions for draining the pump's internal fluid system.
Procedures for cleaning the external surfaces and internal fluid system.
Information on compatible pads and optional accessories.
Explains the devices controlling the water temperature.
Describes the pump and hose system for fluid circulation.
Lists the necessary tools for performing functional checks.
Instructions for visually inspecting the unit's physical condition.
Details the procedure and frequency for motor lubrication.
Guidance on connecting the TPC1 test cover for functional testing.
Procedure for measuring the unit's ground resistance.
Procedure for measuring current leakage from the unit.
Method for verifying the functionality of the tip-over switch.
Procedure for measuring the pump's flow rate.
Procedure for testing the unit's operating temperature accuracy.
Procedure for testing the backup limit thermostat functionality.
Steps to perform a leak test after reassembly.
Guidance on correctly reinstalling the cover and gasket.
Instructions for removing the pump's external cover.
Procedures for accessing and removing the pump motor.
Instructions for removing and reinstalling the heater unit.
Procedures for removing and reinstalling the PC board.
Steps for removing and replacing the manifold backup limit thermostat.
Information regarding the well backup limit thermostat replacement.
Instructions for removing and reinstalling the unit's tray assembly.
Lists the necessary equipment for calibrating the unit.
Outlines the steps for calibrating the T/Pump system.
Details the warranty coverage for the pump unit.
Outlines the warranty for single-use patient pads.
Details the warranty for reusable patient pads.
Explains the warranty coverage for replacement parts.
General| Brand | Gaymar |
|---|---|
| Model | T/PUMP TP500 |
| Category | Medical Equipment |
| Language | English |
To Next Page
