Need help?Do you have a question about the GB IDAN and is the answer not in the manual?
General| Brand | GB |
|---|---|
| Model | IDAN |
| Category | Car Seat |
| Standard | ECE R44/04 |
| Safety Standards | ECE R44/04 |
| Material | Polyester |
| Adjustable Headrest | Yes |
| Side Impact Protection | Yes |
| Removable Cover | Yes |
Crucial advice regarding airbags, seating positions, and vehicle manual references.
Emphasis on reading the manual, following instructions, and consulting vehicle manuals.
Specifies weight/height limits, body support use, and proper harness adjustment.
Guidance on base installation, carrier attachment, L.S.P. use, and unattended children.
Warnings on vehicle belt types, restraint age, damage, and crash history.
Instructions on checking for damage and replacing the restraint after a crash.
Specifies height/weight limits, head position, and harness strap adjustment.
Explains the 4 handle positions and safety warnings for use in the vehicle.
How to fasten, release, and position the harness buckle and chest clip.
Instructions on how to loosen and tighten the harness straps.
How to adjust the headrest for proper harness height.
Step-by-step guide to securing the child with the harness and chest clip.
How to properly tighten the harness and perform the pinch test for fit.
Guidance on avoiding front seats with airbags and using back seats.
Warnings against unlocked seats and notes on positioning relative to the front seat.
Lists and describes vehicle belt systems safe for installation.
Prohibits use with motorized shoulder belts or door-attached belts.
Warnings against using belts with two retractors, including inflatable ones.
Prohibits belts with ELRs that stay loose.
Prohibits lap belts positioned forward of the seat crease.
Ensures the load leg is extended into a locked position with firm floor contact.
Warning against installing where the load leg pushes the base up above the seat.
Explains why correct recline is critical for child safety and breathing.
Pressing the plate to lock it and checking for automatic lever rotation.
Verifying the base is installed correctly by checking for movement.
Step-by-step instructions to attach the infant carrier to the base.
Steps to safely detach the infant carrier from the base.
Emphasizes using a locking clip with non-locking vehicle belts.
Warning about the vehicle belt buckle's placement relative to the lower lap belt guide.
Warning against routing both belts under both guides.
Explains why correct recline is critical and details risks of incorrect positions.
A comprehensive checklist to ensure proper understanding and installation before use.
To Next Page
