7
G
Finishing lamination
1. Press and hold POWER button for one second and “COOL”
symbol appears on the LCD.
2. After the roller cool down (below 65°C), the laminator will beep
and power will be stopped automatically.
3. Press the power switch on the back of the laminator to turn the
CAUTION:
power switch protects and extends the life of the rollers.
NOTE: For added safety and environmental reasons the laminator
will automatically go into sleep mode after 120 minutes of inactivity.
If you wish to use the laminator again, press the POWER button for 1
second to turn on the machine.
m
Laminating Tips
• DO NOT LAMINATE AN EMPTY POUCH.
could cause the machine to jam.
• Before laminating important or unique documents, always run a
test pouch through the laminator using a similar type of document.
• As soon as hot lamination is completed, remove the lamination
cooling to prevent the pouch from curling.
• Do not cut pouches prior to lamination.
Guarantee
Operation of this machine is guaranteed for 1 year from date of
purchase, subject to normal use. Within the guarantee period, ACCO
Brands Europe will at its own discretion either repair or replace the
defective machine free of charge. Defects due to misuse or use for
inappropriate purposes are not covered under the guarantee. Proof
of date of purchase will be required. Repairs or alterations made
by persons not authorised by ACCO Brands Europe will invalidate
the guarantee. It is our aim to ensure that our products perform to
rights which consumers have under applicable national legislation
governing the sale of goods.
If you experience a technical fault with your product during the
warranty period, please contact the relevant ACCO service centre.
Depending on the diagnostics and the model type, we will either
arrange a service call by an engineer or we will ask you to return
the machine to ACCO. If you return the machine, ACCO will, at its
discretion, in accordance with law, either (i) repair the machine using
either new or refurbished parts, or (ii) replace the machine with a
new or refurbished machine that is equivalent to the machine being
replaced.
Register this product online at www.accobrands.com
Lamination Guide
Material Film thickness
Setting without Carrier Setting with Carrier
Temperature Speed Temperature Speed
75 ~ 100 Micron 100°C 6 130°C 4
125 ~ 150 Micron 120°C 4 130°C 3
175 ~ 250 Micron 120°C 3 140°C 2
300 ~ 350 Micron 130°C 2 - -
Brochure Paper
75 ~ 100 Micron 100°C 5 130°C 4
125 ~ 150 Micron 120°C 3 140°C 3
175 ~ 250 Micron 130°C 2 140°C 2
300 ~ 350 Micron 140°C 2 - -
Photo Paper
75 ~ 100 Micron 100°C 4 130°C 3
125 ~ 150 Micron 130°C 3 140°C 2
175 ~ 250 Micron 140°C 2 140°C 1
NOTE: For “STAND BY” mode, please keep the temperature at 70°C and speed 2.
To Next Page
Loading...
