Need help?Do you have a question about the GDS DRIVE 500 and is the answer not in the manual?
Technical specifications and physical dimensions of the gate operator.
Step-by-step guide for physically mounting the gate operator and rack.
Procedures for setting the gate's operational direction and installing limit switches.
Details on power supply and connections for the gate operator system.
Diagram and labels for the main control board components and connections.
Instructions for pairing remote transmitters with the gate operator.
Configuring gate run times, auto-close, pedestrian, and other operational modes.
Adjusting the operator's sensitivity to gate movement resistance.
Guide to diagnosing problems based on audible beeps and operational conditions.
Instructions for manually disengaging and re-engaging the gate operator.
Recommended routine checks and servicing for the gate operator.
Details on the product warranty, terms, and conditions.
General| Motor voltage | 24 V DC |
|---|---|
| Max. gate weight | 500 kg |
| Operating temperature | -20°C to +55°C |
| Protection class | IP44 |
| Power supply | 230V AC |
To Next Page