GE Interlogix Simon User Manual

Simon Security System 16
Option 01 - Status Beeps
Add this option to enable panel beeps. Status beeps are any beeps (including chime
beeps) that come from the panel. See “Status Beeps”.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Add from the Start menu. Panel announces, Select from main menu.
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select
5. Press DONE. Panel announces, Option 1 is on.
Delete turns off panel piezo beeps.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Delete from the Start menu. Panel announces, Select from main menu.
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press DONE. Panel announces, Option 1 deleted.
Option 02 - Panel Voice
Panel Voice may be disabled, except for status messages, open sensor responses, and
when in program mode.
Add enables the panel voice.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Add from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 02. Panel announces, Option 2, press again for next option or done to select
6. Press DONE. Panel announces, Option 2 is on.
Delete disables the panel voice.
Note
The panel voice is always on
for status messages, open
sensor responses and when
in program mode.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Delete from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 02. Panel announces, Option 2 press again for next option or done to select.
6. Press DONE. Panel announces, Option 2 deleted.
Option 03 - Latchkey Time
Adding this option allows you to program Latchkey Time. Latchkey is used to notify
parents if children do not arrive home and disarm the system at a predetermined time.
Note
The system clock must be
set for Latchkey to function.
1. Open panel cover. Panel announces, Use numbered keys to enter ID.
2. Enter Access Code using the numbered keys. Panel announces, Please select from
Start Menu.
3. Press Add from the Start menu. Panel announces, Select from main menu
4. Press Option #. Panel announces, Option 1, press again for next option or done to
select.
5. Press 03. Panel announces, Option 3, press again for next option or set latchkey
hours and minutes, then press done.
6. Press Hours and Minutes to set the time.
7. Press DONE. Panel will announce Latchkey time that has been set.

GE Interlogix Simon Specifications

General

Brand	GE Interlogix
Model	Simon
Category	Security System
Language	English