GE Medical Systems MAC 1200 User Manual

MAC
®
1200
Operator’s Manual
Software Version 6
2012250-022 Revision B

GE Medical Systems MAC 1200 Specifications

General

Channels	12
Display	LCD
Printing	Thermal Printer
Frequency Response	0.05 to 150 Hz
CMRR	> 100 dB
Type	ECG
Print Speed	25 mm/sec
Input Impedance	≥10 MΩ
Power Supply	AC
Connectivity	RS-232
Battery Type	Rechargeable
Sampling Rate	500 Hz

Summary

1 The Basics

Safety Information

Emphasizes the importance of adhering to manual instructions for user and patient safety.

4 Preparing for ECG Recording

5 Recording in 12 Lead Mode

ECG Transmission

Outlines the methods and procedures for transmitting recorded ECG data.

5 Recording in 12 Lead Mode (Continued)

6 Recording in 6 Lead Mode

7 Arrhythmia Mode Recording

Recording

Details the process of starting and stopping recordings in Arrhythmia mode.

8 Pacemaker Patients / Recording During Defibrillation

ECG Recording During Defibrillation

Provides guidance on recording ECGs during defibrillation procedures.

9 System Setup

12 Lead Mode

Details configuration options specific to the 12 Lead operating mode.

9 System Setup (Continued)

High Security

Options for enhancing device security and access control.

Arrhythmia Mode

Configuration options specific to the Arrhythmia operating mode.

9 System Setup (Continued)

6 Lead Mode

Details configuration options specific to the 6 Lead operating mode.

Modem

Configuration for modem type and communication parameters.

Required Data Fields

Defines which patient data fields are mandatory for recording.

Option Code

Used to activate optional software features by entering codes.

Direct ECG Transmission

Configuration steps for direct data transfer via cable.

ECG Transmission via Modem

Configuration steps for transmitting ECG data via modem.

10 Loading Chart Paper

11 Cleaning, Disinfection and Maintenance

11 Cleaning, Disinfection and Maintenance (Continued)

Checks Before Each Use

Routine visual inspections to ensure device integrity and safety before operation.

12 Troubleshooting

Troubleshooting Chart

A comprehensive table listing common issues, their causes, and recommended solutions.

13 Technical Specifications

Signal Inputs

Detailed technical specifications for all signal input parameters.

13 Technical Specifications (Continued)

Signal Transmission

Power Supply

Mains Operation

13 Technical Specifications (Continued)

Battery Operation

14 Order Information

14 Order Information (Continued)