SETPOINTS MODE
5-4
Summary of Setpoint Page Contents
Page Contents Page Contents
11. MTM Metering setpoints.
MTM communications alarm
MTM CT select
MTM CT primary rating
Power factor alarm
Power factor trip
Frequency alarm
Frequency trip
MTM scaling factor
Voltage reversal trip
12. Auto Reclosure setpoints. (575 only)
Number of reclosure shots
Shot dead times
Scheme reset time
Reclosure enable relay
13. Phase Curves setpoints. (575 only)
Phase curve changeover time
Phase overcurrent curve 2 shape
Phase overcurrent time dial 2
Phase custom curve 2 trip times
14. Ground Curves setpoints. (575 only)
Ground curves setpoints
Ground overcurrent curve 2 shape
Ground overcurrent time dial 2
Ground custom curve 2 trip times
To Next Page
Loading...
