SETPOINTS MODE
5-13
Installation of Security Feature:
STEP 1 : Display message S 1.3 “Security Feature”. Press
NEXT CHOICE to display enabled and press store.
STEP 2 : Display message S 1.6 “Change Access Code”.
Press NEXT CHOICE to display YES and press
store.
STEP 3 : By pressing store in step 2, message S 1.7 now
appears. Any number from 0-9999 can now be
entered for an access code. Enter number and
press STORE.
STEP 4 : Re-enter access code, press STORE.
STEP 5 : Display message S 1.4. Use NEXT CHOICE to
display disabled and press STORE.
Use of Access Code:
STEP 1 : Display message S 1.4 “SETPOINT ACCESS”.
Press NEXT CHOICE to display enabled and press
STORE.
STEP 2 : Enter your personalized code and press STORE.
STEP 3 : Access to setpoints is now permitted.
STEP 4 : After all changes have been made, display mes-
sage S 1.4 “SETPOINT ACCESS”. Press NEXT
CHOICE to display disabled and press STORE.
STEP 5 : Setpoint access is now disabled. An attempt to
alter a setpoint will result in an “ILLEGAL AC-
CESS” message.
To Next Page
Loading...
